Residential · Palm Coast, FL
Pet screen solves the constant ripping, sagging, and pushed-out panels that happen when dogs and cats lean, paw, and scratch. Palm Coast Screens installs and repairs heavy-duty pet screen for pool cages, lanais, patios, doors, and window screens, with clean edges and tight, even tension.
Good pet screen results start with the frame, not just the mesh. We inspect aluminum screen frames, panel squareness, and corner keys, then measure spline channels and choose the correct diameter spline so the mesh locks in without rolling out. Old material is removed, channels are cleaned, and we re-screen using a screen roller and controlled tension to prevent wrinkles, loose edges, and premature tears. If a frame is bent or the rail is cracked, we recommend repair or replacement before installing new mesh so the panel holds up to pet pressure.
In coastal Florida, sun and heat harden cheap mesh fast, and wind-driven debris can turn small nicks into long runs. We install pet-resistant screen (typically vinyl-coated polyester) where durability matters most, and we can blend it with standard fiberglass or no-see-um panels elsewhere to balance airflow and visibility. For pool enclosures and lanais, we pay attention to fastener condition, door alignment, and the way panels meet at posts and chair rails so the finished screen line looks straight and stays tight. Edges are trimmed clean, spline is seated flush, and stress points around latches, kick plates, and corners are reinforced through proper tensioning and fit.
Palm Coast customers choose us because we treat pet screen like a structural upgrade, not a quick patch. You get clear options between standard fiberglass, no-see-um insect screening, and heavy-duty pet screen, with straightforward guidance on where each material performs best. Our crew focuses on craftsmanship details homeowners notice, consistent mesh direction, even tension across the panel, neat spline work, and doors that close smoothly after the screening is done. We provide a free written estimate and show you what caused the failure so the next screen lasts longer.
After installation or repair, we walk the job with you and check the panels by hand for tightness, proper spline seating, and clean corners. We confirm doors operate correctly, inspect for gaps that can admit insects, and make sure repaired areas match surrounding panels as closely as possible. You receive a clear scope of work, the material used, and maintenance tips like rinsing salt and keeping pet nails trimmed to reduce abrasion. If you are ready to stop replacing torn panels every season, we will quote the right pet screen solution for your enclosure, patio, windows, or doors.
Yes. We provide a free written estimate after an on-site evaluation so measurements, materials, and scope are accurate.
Yes. Palm Coast Screens is licensed and insured for screening work.
Yes. We can replace individual panels, sections around doors, or any damaged openings without rescreening the entire enclosure, when the framing is in good condition.
Yes. We install and repair screen doors, including hinges, closers, handles, latches, and alignment issues that cause dragging or poor sealing.
Pricing depends on the number and size of openings, mesh type, door and hardware work, and whether aluminum framing repairs are needed before screening.
If your dog jumps on the lanai or your cat treats the patio door like a scratching post, standard fiberglass screen can fail fast. Pet screen is built for higher tear resistance and better puncture performance, making it a smart upgrade for the panels pets hit most often. Palm Coast Screens handles full panel re-screens and targeted repairs so your pool enclosure, porch, or screen door stays tight, clean, and functional.
Pet screen is typically a vinyl-coated polyester mesh that is thicker and stiffer than standard fiberglass. That extra strength helps resist clawing and repeated pressure, but it also means installation technique matters. We match mesh thickness to the frame and spline channel, then roll the spline evenly to avoid high-stress ripples that can lead to edge failure. When a panel keeps popping out, the fix is often correct spline selection and proper seating, not just replacing the mesh.
For pool cages and lanais, we also look at the conditions around the panel, including door fit, latch alignment, and any warped framing that could be concentrating force in one corner. If you are dealing with insects as well as pets, we can discuss mixing materials, using pet screen in the “impact zone” panels and no-see-um insect screen in other areas to improve bug control without darkening the whole enclosure.
Whether you need one torn panel repaired or a full pet screen upgrade across multiple openings, the goal is the same, a cleaner look, fewer call-backs, and a screen system that stands up to pets. Share the openings you want protected and how your pets use the space, and we will recommend a practical layout and provide a free written estimate.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Palm Coast. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
